What is Extracranial Exam?
Extracranial Doppler examinations are measurements of blood flow velocities in the extracranial vessels, and particularly the Common, External, and Internal Carotid arteries, as well as the Subclavian artery. These measurements are key in the diagnosis of cerebral pathology and circulation.
How to Perform Extracranial Tests
The extracranial vessels are easily accessible with standard Continuous Wave (CW) Doppler probes and allow quick identification of abnormal blood flow patterns. The selection of the Doppler probe frequency depends on the vessel size and its’ distance from the skin. The 4 MHz and 8 MHz frequencies are the most common selections for extracranial measurements.
Extracranial measurements serve various clinical purposes, such as identifying carotid stenosis or similar lesion, determining increased distal cerebral resistance, Subclavian Steal Syndrome, and Stroke assessment. The measured blood flow velocities increase significantly in the area of stenosis, until the stenosis decreases the effective arterial diameter to a critical level.
Another common parameter is the Lindegaard Ratio (LR). The LR is defined as the ratio between the mean Middle Cerebral artery (MCA) velocity and the mean Internal Carotid Artery (ICA) velocity. It is an essential diagnostic parameter when determining if high cerebral velocities result from a cerebral hemorrhage, arterio-venous malformations, or other factors.
Doppler Probes
Gold Standard ABI Measurement Method
Using the Falcon for Extracranial Measurements
The Falcon supports a variety of CW Doppler probes, including 4 MHz, 8 MHz, and 10 MHz probes.
These frequencies allow optimal access and measurements of larger/smaller and deeper/superficial blood vessels. The higher frequencies are intended for smaller and shallower vessels, and vice versa.
The Falcon protocols allow the configuration of any blood vessel of interest, and this is supported with a schematic picture of the carotid circulation for improved documentation.
The Doppler measurements include complete spectral analysis, which allows optimal diagnosis and visualization, for example, of systolic bruits. A complete set of Doppler parameters is automatically calculated, including:
- Peak velocity,
- Mean velocity,
- Diastolic velocity,
- Pulsatility index (PI),
- Resistance index (RI),
- Systolic-Diastolic ration (S/D), systolic rise time, and
- heart rate.
- The spectral color palette, display, and noise rejection can be configured and optimized for each user.
Likewise, the peak systolic envelope can be controlled, Y-Axis units (cm/sec or KHz), as well as a range of other Doppler controls, including Sweep Time, Gain, High-Pass Filter, Scale, and Volume.
Expected Results
The criteria for the assessment of the extracranial blood flow measurements depends on the pathology. Focal stenosis will cause a significant increase in mean and peak blood flow velocities, up to a critical level, after which flow will decrease. An intracranial hemorrhage and increased MCA velocity will likely result in higher Lindegaard ratio values. Other criteria for the assessment of pathology are further defined in the accepted international guidelines.
Example of Extracranial measurements performed with Viasonix Falcon/PRO on the Common Carotid,